TucsonDataManu

.com

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual

The complete handbook for servicing, maintaining, and repairing the 4th generation Hyundai Tucson (NX4) cars manufactured after 2020 is the Hyundai Tucson (NX4) Repair handbook.

When doing maintenance and repairs on your Hyundai Tucson NX4, this handbook is a vital tool that will help you do the work quickly and accurately.

READ NEXT:

 General Information

 Troubleshooting

Symptom- Engine misfire with abnormal internal lower engine noises. Suspect area/ Remedy Loose or improperly installed drive plate(or fly wheel)./  Repair or replace the drive plate(or fly wheel) as required. Worn piston rings. (

 Specifications

Tightening Torques Special Service Tools Tool (Number and name)/ Illustration/  Use Valve spring compressor (09222-3K000) Valve spring compressor adapter (09222-3K100)/  / Removal and i

SEE MORE:

 Cowl Top Cover

Component Location Cowl Top Cover Replacement Remove the cap and the nuts, and then remove the wiper arm (A). Tightening torque : 22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft) Disconnect the washer nozzle (A).

 Measuring the resistance of the pressure sensor

Turn ignition switch OFF. Disconnect the pressure sensor connector. Measure resistance between sensor terminal and terminal. Check the measured resistance. (Refer to table) Table 1 Removal Remove the coupling assembly. (Refer to

Information