TucsonDataManu

.com

Hyundai Tucson: Rear Seat

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body (Interior and Exterior) / Rear Seat

Front seat cushion cover / Rear seat back assembly

Component Location Rear seat cushion assembly Rear seat back assembly Replacement Rear seat cushion assembly Remove the rear seat cushion assembly (A). Press the lock pin, separate the connectors (A). To inst

Rear seat back cover - LH

Component Location Rear seat back cover LH Rear seat back cover RH Replacement WARNING Put on gloves to protect your hands. WARNING Take care not to bend or scratch the rear seat assembly. LH Remove the rear seat back assembly L

Rear seat back cover - RH

Remove the rear seat back assembly RH, (Refer to Rear Seat - "Rear Seat Assembly") Loosen the mounting screw, remove the rear seat slide knob (A). Loosen the mounting screws, press the lock pin (B) and remove the rear se

SEE MORE:

Rear seat belt rectrator

Components Location Rear seat belt rectrator RH Rear seat belt rectrator LH Replacement WARNING When installing the belt, make sure not to damage the retractor. Remove the luggage side trim. (Refer to Trunk Trim - "Luggage S

Knock Sensor (KS)

Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the