Hyundai Tucson: Rear Seat Belt Retractor
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body (Interior and Exterior) / Rear Seat Belt Retractor
READ NEXT:
Rear seat belt rectrator
Components Location
Rear seat belt rectrator RH
Rear seat belt rectrator LH
Replacement
WARNING
When installing the belt, make sure not to damage the retractor.
Remove the luggage side trim.
(Refer to Trunk Trim - "Luggage S
Rear center seat belt retractor
Components Location
Rear center seat belt retractor
Replacement
WARNING
When installing the belt, make sure not to damage the retractor.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
After loosening
SEE MORE:
Engine Room Under Cover
Removal
Turn the ignition switch OFF and disconnect the battery (-) terminal.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Disconnect the ground cable (A).
Tightening to
When Using the CVVD fixture
When installing the CVVD assembly mounting bolts (M6), tighten sequence
shown.
Tightening torque :
1ST
4.9 - 6.9 N.m (0.5 - 0.7 kgf.m, 3.6 - 5.1 lb-ft)
2nd
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
Remove the CVVD fixture
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
