Hyundai Tucson: Integrated Body Control Unit (IBU)
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body Electrical System / Integrated Body Control Unit (IBU)
READ NEXT:
Body Control Module Controls The Followings
Description
Body Control Module Controls The Followings
Wiper & Washer Control
Defroster Control
Driving Control
Tailgate Control
Window Control
Interior Control
Exterior Control
Panic alarm Control
MTS
Flasher output Contr
IBU Diagnosis With Diagnostic Tool
In the body electrical system, failure can be quickly diagnosed by using
the vehicle diagnostic system.
(1) Fault Code Searching : Checking failure and code number (DTC)
(2) Data Analysis : Checking the system input/output data state
(3) A
IMS (Integrated Memory)
Description
The optimal seat position set by the driver is memorized into the power seat
unit by using IMS switch.
In case of the position change, the seat can restore its preset position by IMS
switch.
It has safety functions of restoring
SEE MORE:
Front Muffler
Removal and Installation
Disconnect the battery negative terminal.
Disconnect the oxygen sensor connector (A).
Remove the engine room rear under cover (A).
Tightening torque :
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)
Seat Belt Pretensioner
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH).
When a vehicle
crashes with a certain degree of frontal impact, the pretensioner seat belt
helps to reduce the severity of
injury to the front seat
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
