Hyundai Tucson: Drive Belt System
READ NEXT:
Drive Belt System- Removal and Installation
Components
Crankshaft Damper Pulley
Drive Belt Tensioner
Drive Belt
Removal and
Installation
Fix the drive belt tensioner.
(1) Insert the drive belt tensioner by installing fixing pin (A) after
turning the drive belt tensione
Drive Belt Inspection
Visually check the belt for excessive wear, frayed cords etc.If any
defect has been found, replace the
drive belt.
WARNING
Cracks on the rib side of a belt are considered acceptable. If the
belt has chunks missing from
the ribs, it sho
SEE MORE:
GPF Regeneration - Removal
Removal
Turn the ignition switch OFF and disconnect the battery negative (-)
cable.
Lift up the vehicle.
Remove the floor under cover front RH.
Disconnect the Exhaust Gas Temperature Sensor (EGTS) Front (A) and Rear
(B).
Rem
Fuel requirements
Gasoline engine
Unleaded
Your new vehicle is designed to use only unleaded fuel having an octane
number
((R+M)/2) of 91 (Research Octane Number 95) or higher. (Do not use methanol
blended
fuels)
Your new vehicle is designed to obtain maximum
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
