TucsonDataManu

.com

Hyundai Tucson: Mirror

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body (Interior and Exterior) / Mirror

READ NEXT:

 Outside rear view mirror

Component Location Outside rear view mirror Replacement WARNING When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. Put on gloves to prevent hand injuries

 Inside rear view mirror

Component Location Inside rear view mirror Replacement WARNING When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. Put on gloves to prevent hand injuries.

 Cowl Top Cover

Component Location Cowl Top Cover Replacement Remove the cap and the nuts, and then remove the wiper arm (A). Tightening torque : 22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft) Disconnect the washer nozzle (A).

SEE MORE:

 Rear Axle Assembly- Removal- 2WD

Components Rear brake disc Rear hub assembly Dust cover Rear carrier assembly Removal 2WD WARNING When lifting a vehicle using a lift, be careful not to damage the lower parts of the vehicle (floor under cover, fuel filter, fue

 Intake/Exhaust  CVVT Timing Mark

Intake CVVT Timing Mark Exhaust CVVT Timing Mark Install the cam to cam guide (A). Tightening torque : 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft) Install the intake variable force solenoid (VFS) valve (A). Tightenin

Information