Hyundai Tucson: Tail Gate
READ NEXT:
Tail Gate - Adjustment
Place the car on a flat surface and check whether the body and trunk lid
are well-aligned.
After loosening the tailgate hinge (A) mounting bolt, adjust the
tailgate by moving it up and down or from side to side.
Adjust the gap between th
Tail Gate - Replacement
Replacement
Tailgate upper trim
WARNING
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to
prevent damage to components.
Put on gloves to prevent hand injuries.
Using a screwdriver or rem
Tailgate latch assembly
Component Location
Tailgate latch assembly
Replacement
WARNING
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to prevent
damage to components.
Put on gloves to prevent hand injuries.
SEE MORE:
Tie rod end
Remove the tie rod end after loosening the nut.
Tightening torque :
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)
WARNING
Before removing the tie rod end, note by measuring the length of the
thread or marked with paint.
Repl
Crankcase Emission Control System
Description
Crankcase pressure regulating valve (PRV)
Breather hose
Air flow
Intake manifold
Cylinder block
Blow-by gas flow
Blow-by gas inflow to the cylinder head cover throungh the cylinder
block & head & chain c
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
