Windshield glass upper molding
Put on gloves to prevent hand injuries.
Use seat covers to avoid damaging any surfaces.
Remove the front pillar trim.
(Refer to Interior Tri
Using a knife, scrape the remaining sealant around the body panel
leaving about 2mm-thick sealant
(0.0079 in.) on the bonding surface. If installing a new windshield glass,
make alignment marks on
the windshield glass and th
Disconnect the negative (-) battery terminal.
Remove the rear bumper assembly.
(Refer to Body - "Rear Bumper Assembly")
Disconnect the rear corner radar connector (A).
Loosen the mounting n