Hyundai Tucson: Front Bumper
READ NEXT:
Front Bumper - Replacement
Components
Front bumper assembly
Front bumper side bracket
Component Location
Front bumper assembly
Replacement
WARNING
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to
p
Radiator grill
Component Location
Radiator grill
Replacement
WARNING
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to
prevent damage to components.
Put on gloves to prevent hand injuries.
WARNI
Rear Bumper
Components
Rear bumper assembly
Rear bumper under cover C'TR
Rear bumper side under cover RH
Rear bumper side bracket RH
Rear bumper side bracket LH
SEE MORE:
Intake actuator
Components
Intake actuator
Inspection
Turn the ignition switch OFF.
Disconnect the intake actuator connector.
Verify that the intake actuator operates to the fresh air position when
connecting 12V to terminal 3 and grounding ter
Tie rod end
Remove the tie rod end after loosening the nut.
Tightening torque :
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)
WARNING
Before removing the tie rod end, note by measuring the length of the
thread or marked with paint.
Repl
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
