Hyundai Tucson: Front Radar System
- General Safety Information and Caution
- Front Radar System - Description and operation
- Front Radar System - Inspection
- Front Radar Sensor Alignment
- Remote control switch
READ NEXT:
General Safety Information and Caution
Be careful when driving the vehicle using the smart cruise control
system as follows.
(1) On curves or inclines/declines
The smart cruise control system may have limits to detect distance to
the vehicle ahead due to
road and traffic
Front Radar System - Description and operation
WARNING
The System may be limited when
The radar sensor or camera is blocked with a foreign object or
debris.
The camera lens is contaminated due to tinted filmed or coated
windshield, damaged glass, or smck of foreign matter
(sticker,
Front Radar System - Inspection
Components Location
Front radar unit
Smart cruise control switch
Specification
Circuit Diagram
Inspection
Inspection procedure for vehicle with Forward Collision-Avoidance Assist and
Smart Cruise Control system failure
C
SEE MORE:
Panorama Sunroof - Removal
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
Open the roller blind using the panorama sunroof switch.
WARNING
Leave 10 - 20cm (0.3937 - 0.7874 in) of the roller blind unopened.
Remove the roller blind
Measuring the resistance of the pressure sensor
Turn ignition switch OFF.
Disconnect the pressure sensor connector.
Measure resistance between sensor terminal and terminal.
Check the measured resistance. (Refer to table)
Table 1
Removal
Remove the coupling assembly.
(Refer to
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
