TucsonDataManu

.com

Hyundai Tucson: Seat belt safety precautions

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Seats & Safety System / Seat belts / Seat belt safety precautions

This section describes how to use the seat belts properly. It also describes some of the things not to do when using seat belts.

Always fasten your seat belt and make sure all passengers have fastened their seat belts before starting any trip. Air bags are designed to supplement the seat belt as an additional safety device, not a replacement. Most countries require all occupants of a vehicle to wear seat belts.

WARNING

Seat belts must be used by ALL passengers whenever the vehicle is moving. Take the following precautions when adjusting and wearing seat belts:

  • Children under the age of 13 should be properly restrained in the rear seats.
  • Never allow children to ride in the front passenger seat, unless the air bag is deactivated. If a child is seated in the front passenger seat, move the seat as far back as possible and properly restrain them in the seat.
  • NEVER allow an infant or child to be carried on an occupant's lap.
  • NEVER ride with the seatback reclined when the vehicle is moving.
  • Do not allow children to share a seat or seat belt.
  • Do not wear the shoulder belt under your arm or behind your back.
  • NEVER wear a seat belt over fragile objects. If there is a sudden stop or impact, the seat belt can damage it.
  •  Do not use the seat belt if it is twisted. A twisted seat belt will not protect you properly in an accident.
  • Do not use a seat belt if the webbing or hardware is damaged.
  • Do not latch the seat belt into the buckles of other seats.
  • NEVER unfasten the seat belt while driving. This may cause loss of vehicle control resulting in an accident.
  • Make sure there is nothing in the buckle interfering with the seat belt latch mechanism. This may prevent the seat belt from fastening securely.
  • No modifications or additions should be made by the user which will either prohibit the seat belt adjusting devices from operating to remove slack, or prohibit the seat belt assembly from being adjusted to remove slack.

WARNING

Damaged seat belts and seat belt assemblies will not operate properly.

Always replace:

  • Frayed, contaminated, or damaged webbing.
  • Damaged hardware.
  • The entire seat belt assembly after it has been worn in an accident, even if damage to webbing or assembly is not apparent.

Seat belt warning light

Seat belt warning light (for driver's seat)

Instrument cluster

As a reminder to the driver, the seat

As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time the ignition is ON position regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds.

If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated.

If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened.

If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

Seat belt warning light (for front passenger's seat)

As a reminder to the front passenger, the front passenger's seat belt warning lights will illuminate for approximately 6 seconds each time the ignition is ON regardless of belt fastening. If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated.

If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened.

If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

WARNING

Riding in an improper position adversely affects the front passenger's seat belt warning system. It is important for the driver to instruct the passenger to properly be seated as instructed in this manual.

Information

  • Although the front passenger seat is not occupied, the seat belt warning light will blink or illuminate for 6 seconds.
  • The front passenger's seat belt warning may operate when luggage is placed on the front passenger seat.

Seat belt warning light

Seat belt warning light (for driver's seat)

Instrument cluster

As a reminder to the driver, the seat

As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time the ignition is ON position regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds.

If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated.

If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened.

If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

Seat belt warning light (for front passenger's seat)

As a reminder to the front passenger, the front passenger's seat belt warning lights will illuminate for approximately 6 seconds each time the ignition is ON regardless of belt fastening. If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated.

If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened.

If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.

WARNING

Riding in an improper position adversely affects the front passenger's seat belt warning system. It is important for the driver to instruct the passenger to properly be seated as instructed in this manual.

Information

  • Although the front passenger seat is not occupied, the seat belt warning light will blink or illuminate for 6 seconds.
  • The front passenger's seat belt warning may operate when luggage is placed on the front passenger seat.

    READ NEXT:

     Seat belt restraint system

    WARNING Improperly positioned seat belts may increase the risk of serious injury in an accident. Take the following precautions when adjusting the seat belt: Position the lap portion of the seat belt as low as possible across your hi

     Additional seat belt safety precautions

    Seat belt use during pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt. Pregnant women should always wear a lap-shoulder seat belt.

     Child restraint system (CRS)

    SEE MORE:

     Multifunction Switch - Components

    Steering column Lighting swtich Wiper switch Clock spring Steering wheel Driver airbag (DAB) Specifications Removal Disconnect the negative (-) battery terminal. Remove the clock spring. (Refer to Restraint - "

     Auto defogging actuator

    Components Location Auto defogging actuator Inspection Turn the ignition switch OFF. Disconnect the auto defogging connector. Verify that the auto defogging actuator operates to the open position when connecting 12V to termina

    Information