Hyundai Tucson: General Information
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Brake System / General Information
READ NEXT:
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the problem. The numbers
indicate the priority of the
likely cause of the problem.
Check each part in order.
If necessary, replace these parts.
Specificat
ESC Bleeding of Brake System
This procedure should be followed to ensure adequate bleeding of air and
filling of the ESC unit, brake lines and master cylinder
with brake fluid.
Connect the brake fluid filler to the reservoir tank.
WARNING
Do not reuse the drained f
SEE MORE:
Cylinder head cover
Removal
Disconnect the battery negative terminal.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
Turn the crankshaft damper pulley so that No. 1 piston is at top dead
center.
(1)
Electric WGT Control Actuator- Installation
WARNING
When replacing the Electric WGT Control Actuator, perform the
rod adjustment procedure.
When install the electric WGT control actuator, do not reuse a
C-Ring.
Install in the reverse order of removal.
Adjustment
Rod Adjus
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
