Hyundai Tucson: Tires_Wheels
READ NEXT:
Tire Rotation
Tire Wear
WARNING
Using tires and wheel other than the recommended sizes could cause
unusual handling characteristics
and poor vehicle control, resulting in a serious accident.
Measure the tread depth of the tires.
Tread depth limit : 1.6
Tires_Wheels - Installation
Installation
Apply tire soap or lubrication to the top and bottom tire beads.
WARNING
When changing the wheel, do not reuse the snap-in type TPMS sensor.
To fit the bottom bead, position the valve at the 5 o'clock position
rela
Tires_Wheels- Removal
Remove the rear wheel and tire (A).
WARNING
Be careful not to damage the hub bolts when removing the rear wheel and
tire (A).
Front
Rear
Installation
Install the rear wheel and tire (A).
Front
Rear
Tighten the hub nuts
SEE MORE:
Differential Carrier Assembly - Reassembly
Reassembly
Pinion drive gear assembly
Install the inner pinion bearing adjustment shim (A) 011 the pinion
drive gear assembly.
Install the inner pinion bearing (A) on the pinion drive gear using SST
(0K530-P2200) and press.
Vehicle break-in process
By following a few simple precautions for the first 600 miles (1,000km) you
may add to
the performance, economy and life of your vehicle.
Do not race the engine.
While driving, keep your engine speed (RPM, or revolutions per minute)
betwe
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual