Hyundai Tucson: Power Windows
READ NEXT:
Function Of Safety Power Window
Operation
When driver door power window auto-up switch is operated, safety function is
activated.
Safety function condition
When detect the force of 100N (using the lON/mm spring) during the window
rising, window is
reversed.
Length
Initializing Method of the Safety Power Window
Initializing of Battery Connection
When the battery power is removed for over 5 minutes, safety power window
switch need the
initializing.
(1) Power window operation before initializing
Manual-Up/Down function is available
Auto-Up fun
Rear Glass Defogger
Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent damaging
the heater line. Apply
finger pressure on the tin foil, moving the tin foil along the grid line to
check for open circuits.
Turn on the defogger swit
SEE MORE:
Ignition Switch Assembly
Removal
Disconnect the negative (-) batteiy terminal.
Remove the steering column upper and lower shrouds.
(Refer to Body - "Steering Column Shroud Panel")
Remove the ignition switch (A) after disconnecting the 6P connector (B).
Accelerator Position Sensor (APS)
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation
angle of the accelerator pedal. The APS is one of the most important sensors in
engine control system,
so it consists of the tw
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual