Hyundai Tucson: Power Tailgate Module
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body Electrical System / Power Tailgate Module
- Tailgate Position And Direction
- Programming the max. T/gate opening (Garage Position)
- Power Tailgate Module - Component Location
READ NEXT:
Tailgate Position And Direction
Description
Power tailgate is an electro-mechanical system designed to provide power
opening and closing of the tailgate through the
push of a button of a remote key (fob), console switch, inner switch or an
outside handle switch of the tailgat
Programming the max. T/gate opening (Garage Position)
The customizable Programmed Basic Position is set equal to the Maximum
Basic Position after the Learned Mechanical
End Position is learned.
The customer can change the Programmed Basic Position to any new
position between the Maximum
Power Tailgate Module - Component Location
Buzzer
Tailgate open switch (Crsah pad lower switch)
Fob key
Spindle Drive (2EA)
Tailgate inner switch
Power Latch
PTG Control Module
Tailgate Inner Switch
Failure Inspection
Diagnosis with diagnostic tool
In the body elec
SEE MORE:
Luggage side trim
Component Location
Luggage side trim
Replacement
WARNING
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to
prevent damage to components.
Put on gloves to prevent hand injuries.
WA
PM sensor
Components Location
PM sensor
Replacement
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body (Interior and Exterior) - "Crash Pad Lower Panel")
Loosen the mounting screw, remove
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
