Hyundai Tucson: Forward Collision-Avoidance Assist Settings
Setting features
Forward Safety
With the engine on, select 'Driver Assistance → Forward Safety' from the Settings menu to set whether or not to use each function.
- If 'Active Assist' is selected, Forward Collision-Avoidance Assist will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk.
- If 'Warning Only' is selected, Forward Collision-Avoidance Assist will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted. The driver must apply the brake pedal or steer the vehicle if necessary.
- If 'Off' is selected, Forward Collision- Avoidance Assist will turn off. The warning light will illuminate on the cluster.
The driver can monitor Forward Collision-Avoidance Assist ON/OFF status from the Settings menu. If the warning light remains ON when Forward Collision-Avoidance Assist is ON, have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
When the engine is restarted, Forward Collision-Avoidance Assist will always turn on. However, if 'Off' is selected after the engine is restarted, the driver should always be aware of the surroundings and drive safely.
CAUTION
- If 'Warning Only' is selected, braking is not assisted.
- The settings for Forward Safety include 'Basic function' and 'Junction Turning' (if equipped).
Information
Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button for more than 3 seconds. The warning light will illuminate on the cluster.
Warning Timing
With the engine on, select 'Driver Assistance → Warning Timing' from the Settings menu to change the initial warning activation time for Forward Collision-Avoidance Assist.
When the vehicle is first delivered, Warning Timing is set to 'Normal'. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
Warning Volume
With the engine on, select 'Driver Assistance → Warning Volume' from the Settings menu to change the Warning Volume to 'High', 'Medium' or 'Low' for Forward Collision-Avoidance Assist.
If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
CAUTION
- The setting of the Warning Timing and Warning Volume applies to all functions of Forward Collision- Avoidance Assist.
- Even though 'Normal' is selected for Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late.
- Select 'Late' for Warning Timing when traffic is light and when driving speed is slow.
Information
If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.
READ NEXT:
Forward Collision-Avoidance Assist Operation
Basic function Warning and control The basic function for Forward Collision- Avoidance Assist is to help warn and control the vehicle depending on the collision risk level : 'Collision Warning', 'Emergency Braking' and 'Stopping vehicle and enForward Collision-Avoidance Assist Malfunction and Limitations
Forward Collision-Avoidance Assist malfunction When Forward Collision-Avoidance Assist is not working properly, the 'Check Forward Safety system (s)' warning message will appear, and the and warning lights will illuminate on the cluster.Lane Keeping Assist (LKA)
Lane Keeping Assist is designed to help detect lane markings (or road edges) while driving over a certain speed. Lane Keeping Assist will warn the driver if the vehicle leaves the lane without using the turn signal, or will automatically assistSEE MORE:
Control Cable- Installation
Installation WARNING Check if the 4th fixing pin (A) is installed. Install the control cable retainer (B) and then tightening the nuts (A). Tightening torque: 11.8 - 14.7 N.m (1.2 - 1.5 kgf.m, 8.7 - 10.8 lb-ft) Install the clip, iDriveshaft side oil seal #3 B Typel
Remove the transfer assembly. (Refer to 4 Wheel Drive (4WD) System - "Front Wheel Transfer Assembly") Remove the dust cover (A). Remove the oil seal #2 (A). Remove the oil seal #3 (A). Install the oilInformation
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual