Hyundai Tucson: Door locks
READ NEXT:
Operating door locks from outside the vehicle
Mechanical key
Pull out the door handle.
Press the release button (1) located
inside the bottom part of the cover
with a mechanical key or flat-head
screwdriver.
Carefully pull outward on the cover
while continuing to press the re
Operating door unlocks from
inside the vehicle
With the door inside handle
Driver door & Passenger door
If the inner door handle is pulled when
the door is locked, the door will unlock
and open.
Rear Door - Two Pull Operation
If the inner door handle is pulled once
when the door is
Integrated memory system
The IMS, or Integrated Memory System,
for the driver's seat is equipped on some
models. This feature allows the driver
to store and recall the following position
settings with a simple button operation:
Driver's seat position
WARNING
SEE MORE:
IMT System Learning Procedures - Adjustment
IMT System Learning Procedures Table
* Refer to the following table to perform the diagnostic tool learning
procedure.
IMT system learning stams can be checked through the cluster lamp.
Ill case by recompiled procedures (1)
Clear
When Using the CVVD fixture
When installing the CVVD assembly mounting bolts (M6), tighten sequence
shown.
Tightening torque :
1ST
4.9 - 6.9 N.m (0.5 - 0.7 kgf.m, 3.6 - 5.1 lb-ft)
2nd
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
Remove the CVVD fixture
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual