Hyundai Tucson: Automatic climate control system
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Convenient features / Automatic climate control system
- Automatic heating and air conditioning
- Manual heating and air conditioning
- Multi Air Mode
- System maintenance
READ NEXT:
Automatic heating and air conditioning
Driver's temperature control button/
knob
Passenger's temperature control
button/knob
AUTO (automatic control) button
Air intake control button
OFF button
Front windshield defroster button
A/C (air conditioning) button
Fan sp
Manual heating and air conditioning
Start the engine.
Set the mode to the desired position.
For improving the effectiveness of
heating and cooling, select:
Heating:
Cooling:
Set the temperature control to the
desired position.
Set the air intake contr
Multi Air Mode
Multi Air Mode (if equipped)
When the Multi-Air mode button is
pressed, air flow is directed to the
face level and floor level and through
perforated sections along the instrument
panel for the driver and passenger. The
multi-air mode L
SEE MORE:
Rear Outside Combination Lamp
Disconnect the negative (-) battery terminal.
Loosen the mounting bolts then remove the outside rear combination lamp
(A).
Disconnect the rear combination lamp connector (A).
Remove the bulb after turning it in the counter
Tie rod end
Remove the tie rod end after loosening the nut.
Tightening torque :
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)
WARNING
Before removing the tie rod end, note by measuring the length of the
thread or marked with paint.
Repl
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
