Hyundai Tucson: Panorama Sunroof - Component
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body (Interior and Exterior) / Panorama Sunroof / Panorama Sunroof - Component
- Mechanism rail assembly
- Center cover assembly
- Roller blind motor
- Glass motor
- Panorama sunroof frame assembly
- Roof side molding
- Decoration cover
- Movale glass
- Wind deflecter
- Front cover assembly
- Front glass
READ NEXT:
Glass step alignment
Alignment
Perform considerable step alignment after replacing movable glass (A).
Perfrom height adjustment releasing screw (A) a bit.
WARNING
Be careful not to damage screws.
Remove the decoration cover (A).
Panorama Sunroof - Replacement
Open movable glass completely pressing panorama sunroof switch.
Remove the decoration cover (A).
Close movable glass completely pressing panorama sunroof switch .
Loosen the height adjustment releasing screw (A).
WARNING
Be caref
Panorama Sunroof - Installation
Installation
WARNING
In order to mount the front glass, use the tools shown in the
following figure :
Tooling Diagram
Sealant nozzle
Adhesive sealant for car windows
Sealant gun
Primer
Primer application brush
Install t
SEE MORE:
Cylinder Block - Replacement
Components
Rear oil seal
Replacement
Remove the fly wheel.
(Refer to Cylinder Block - "Fly Wheel")
Remove the rear oil seal (A).
Apply engine oil on the edge of new rear oil seal.
Using SSTs (09231-H1100, 09231
Tie rod end
Remove the tie rod end after loosening the nut.
Tightening torque :
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)
WARNING
Before removing the tie rod end, note by measuring the length of the
thread or marked with paint.
Repl
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual