Hyundai Tucson: Multifunction Switch Inspection
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body Electrical System / Multifunction Switch / Multifunction Switch Inspection
- Check for continuity between the terminals in each switch position as shown below.
Inspection (With Diagnostic Tool)
- In the body electrical system, failure can be quickly diagnosed by using
the vehicle diagnostic system (diagnostic tool).
The diagnostic system (diagnostic tool) provides the following information.
(1) Fault Code Searching : Checking failure and code number (DTC)
(2) Data Analysis : Checking the system input/output data state
(3) Actuation test: Checking the system operation condition
(4) S/W Management: Controlling other features including system option setting and zero point adjustment
- If diagnose the vehicle by diagnostic took select "DTC Analysis" and "Vehicle".
- If check current status, select the "Data Analysis" and "Car model".
- Select the 'IBU_BCM' to search the current state of the input/output data.
READ NEXT:
Horn
Component Location
Horn switch
Horn relay
Horn (Low pitch)
Horn (High pitch)
Clock spring
Removal
Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
Remove the bolts and disconnect the h
AVN System
Description
AVN system
The AVN system has improved information search and easiness of manipulation
for the driver by
simplifying the system operation experience and unifying the display of the user
information such as
multimedia and car infor
Emergency Call System
Description
Emergency Call (eCall)
When an accident occurs or the user's request is detected, it notifies the
call center of the vehicle status using the wireless
network so that the center can provide necessary emergency service.
Em
SEE MORE:
CCWD Actuator- Installation
WARNING
When installing the CVVD actuator the shaft gear do not fit
properly, rotate the C W D actuator in both directions and
installing it uaturally.
(Do not impact when installating the component.)
Do not damage to the component whe
Roll rod bracket
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Remove the roll rod bracket (A).
Tightening torque :
Bolt (B): 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
