Hyundai Tucson: Inspection with Diagnostic Tools
Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body Electrical System / Emergency Call System / Inspection with Diagnostic Tools
In the eCall system, failure can be quickly diagnosed by using the vehicle diagnostic system.
The diagnostic system provides the following information.
1) Self diagnosis : Checking failure and code number (DTC)
2) Current data : Checking the system input/output data state
- Select the "Car Model" and the "eCall System" to be checked in order to check the vehicle with the tester.
- To inquire the cause of trouble for each module by self diagnosis, select 'Diagnostic Trouble Code'.
- Select the 'Current Data' menu to check the current state of the input/output data.
eCall System Reset
The eCall System Reset function is to reset when eCall is locked or stopped.
- The eCall System Reset function may result a faise call to the PSAP (Public Safety Answering point) and it also may cause a malfunction to the system, therefore, the unauthorized use of this function is strictly prohibited.
- Turn the ignition switch OFF.
- Connect the diagnostic tools.
- Turn the ignition switch ON without the engine running.
- Select the "Car Model" and "S/W Management".
- Select the "eCall System Reset"
- Follow the screen instructions to perform the "eCall System Reset".
READ NEXT:
eCall Parameter Download
eCall Parameter Download is used to change the parameter value of the eCall
law in Europe.
Turn the ignition switch OFF.
Connect the diagnostic tools.
Turn the ignition switch ON without the engine running.
Select the "Car Model"
Smart Key System
Component Location (1)
Integrated body control unit (IBU)
Interior antenna 2
Door outside handle
Interior antenna 1
Front antenna
Buzzer
Door antenna
Component Location (2)
Tailgate antenna
Rear bumper antenna
T
Smart Key System - Inspection
Self Diagnosis With Scan Tool
It will be able to diagnose defects of SMART KEY system with diagnostic tool
quickly, diagnostic tool can operates actuator
forcefully, input/output value monitoring and self diagnosis.
The following three feature
SEE MORE:
Timing System - Installation
Install the crankshaft sprocket (A).
Place the crankshaft key at the left 180º.
Install the oil pump chain.
(Refer to Lubrication System - "Oil Pump")
Install the timing chain (A).
WARNING
When inst
Transfer Assembly- Inspection
Inspection
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Loosen the oil filler plug (A).
A Type
B Type
Check the oil level.
WARNING
Oil level must be up to fil
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual