TucsonDataManu

.com

Hyundai Tucson: Infotainment system

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Convenient features / Infotainment system

NOTICE

  • If you install an aftermarket HID head lamp, your vehicle's audio and electronic devices may not function properly.
  • Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration.

USB Port

You can use an USB cable to connect

You can use an USB cable to connect audio devices to the vehicle USB port.

Information

When using a portable audio device connected to the power outlet, noise may occur during playback. If this happens, use the portable audio device's power source.

Antenna

Shark fin antenna

The shark fin antenna receives

The shark fin antenna receives transmitted data. (for example: AM/FM, DAB, GPS)

Steering wheel remote controls

NOTICE

NOTICE

Do not operate multiple audio remote control buttons simultaneously.

VOLUME (VOL + / VOL -) (1)

  • Rotate the VOLUME scroll up to increase volume.
  • Rotate the VOLUME scroll down to decrease volume.

SEEK/PRESET () (2) /) (2) ) (2)

If the SEEK/PRESET switch is pressed up or down and held for 0.8 second or more, it will function in the following modes:

  • RADIO mode

It will function as the AUTO SEEK select button. It will SEEK until you release the button.

  • MEDIA mode

It will function as the FF/RW button.

If the SEEK/PRESET switch is pressed up or down, it will function in the following modes:

  • RADIO mode

It will function as the PRESET STATION UP/DOWN button.

  • MEDIA mode

It will function as the TRACK UP/ DOWN button.

MODE (3)

Press the MODE button to toggle through Radio or Media modes.

MUTE ( ) (4)

  • Press the MUTE button to mute the sound.
  • Press the MUTE button again to activate the sound.

Information

See additional information in supplied Infotainment Manual.

Infotainment system (if equipped)

For detailed information, refer to the separately supplied infotainment system manual.

Voice recognition

For detailed information, refer to the

For detailed information, refer to the separately supplied infotainment system manual.

Bluetooth Wireless Technology

  1. Call / Answer button
  2.  Call end button
  3. Microphone

For detailed information, refer to the separately supplied infotainment system manual.

CAUTION

To avoid driver distractions, do not excessively operate the device while driving the vehicle which may lead to an accident.

How vehicle radio works

FM reception

AM and FM radio signals are broadcast

AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers.

When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear.

This can be due to factors, such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area.

AM (MW, LW) reception

AM broadcasts can be received at

AM broadcasts can be received at greater distances than FM broadcasts.

This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere.

In addition, they curve around obstructions so that they can provide better signal coverage.

FM radio station

FM broadcasts are transmitted at high

FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio.

The following conditions are normal and do not indicate radio trouble :

  • Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade.

    When this occurs, we suggest that you select another stronger station.

  • Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears.

  • Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.
  • Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed.

Using a cellular phone or a twoway radio

When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment.

NOTICE

When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehicle's electrical system and adversely affect safe operation of the vehicle.

WARNING

Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone.

    READ NEXT:

     Driving your vehicle

    WARNING Carbon monoxide (CO) gas is toxic. Breathing CO can cause unconsciousness and death. Engine exhaust contains carbon monoxide which cannot be seen or smelled. Do not inhale engine exhaust. If at any time you smell engine exhaust inside

     Before driving

    Before entering the vehicle Be sure all windows, outside mirror(s), and outside lights are clean and unobstructed. Remove frost, snow, or ice. Visually check the tires for uneven wear and damage. Check under the vehicle for any sign

     Ignition switch

    WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle mo

    SEE MORE:

     Condensor - Replacement

    Remove the condensor. (Refer to Air conditioning System - "Condensor") Using a Lwrench, remove the cap (A) on the bottom of the receiver-drier. Remove the receiver-drier (A) from condenser using a long nose plier. Check

     Tailgate back panel

    Component Location Tailgate back panel Replacement WARNING Put on gloves to prevent hand injuries. WARNING Take care not to scratch the tailgate and body surface. Remove the tailgate lower trim. (Refer to Tail Gate - "Tail G

    Information